background image

IMPORTANT SAFETY INSTRUCTIONS

Certificate Of Conformity

TC Electronic A/S, Sindalsvej 34, 8240
Risskov, Denmark, hereby declares on own
responsibility that following products: 

G•Major - Guitar Effects Processor

- that is covered by this certificate and
marked with CE-label conforms with
following standards:

EN 60065

Safety requirements for mains 

(IEC 60065)  operated electronic and 

related apparatus for household
and similar general use

EN 55103-1  Product family standard for 

audio,video, audio-visual and 
entertainment lighting control 
apparatus for professional 
use. Part 1: Emission.

EN 55103-2 Product family standard for 

audio, video, audio-visual and
entertainment lighting control 
apparatus for professional 
use. Part 2: Immunity. 

With reference to regulations in following
directives:
73/23/EEC, 89/336/EEC

Issued in Risskov, January 2001

Anders Fauerskov

Chief Executive Officer

b

EMC / EMI.

This equipment has been tested and found to
comply with the limits for a Class B Digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide
reasonable protection against harmful
interference in residential installations. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on. The user is
encouraged to try to correct the interference by
one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the 
equipment and receiver.

Connect the equipment into an outlet on a 
circuit different from that to which the 
receiver is connected.

Consult the dealer or an experienced 
radio/TV technician for help.

For the customers in Canada:

This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.

Summary of Contents for G-Major





















































Reviews: