TC Electronic G-Major, User Manual

Page: 36 / 52

34
RESONANCE FILTER
Resonance Filter
- FILTER/MOD
Block
The G•Major Resonance filter is basically a Hi
Cut filter with adjustable Q-factor (Resonance).
With increased Resonance value, the filter peak
at the cutoff frequency gets very narrow and
steep. This phenomenon is the very core of the
characteristic sound of Resonance filters.
Order
Range: 2nd to 4th
The Order parameter of the resonance filters
changes the steepness of the filters. 2nd order
filters are 12dB/Octave while 4th order filters
are 24dB/Octave. 4th order filters will “ring” or
resonate more than 2nd order filters.
Hi Cut
Range: 19.95Hz to 20kHz
Determines the frequency above which the Hi
Cut filter will attenuate the high-end frequencies
of the generated effect.
Hi Resonance
Range: 0 to 100%
Sets the amount of resonance on the Hi Cut
filter.
Mix
Range: 0 to 100%
Sets the relationship between the dry signal
and the applied effect in this block.
Out level
Range: -100 to 0dB
Sets the overall Output level of this block.
Auto Resonance Filter
- FILTER/MOD Block
The Auto Resonance filter will create an effect
similar to a Touch Wah. The sweep through a
frequency range is controlled via the dynamics
on the Input.
Sensitivity
Range: 0 to 10
Sets the sensitivity according to the Input you
are feeding the unit.
Response
Range: Fast or Slow
Determines whether the sweep through a
frequency range will be performed fast or slow.
Frequency Max
Range: 1kHz to 10kHz
Limits the frequency range in which the sweep
will be performed.
Mix
Range: 0 to 100%
Sets the relationship between the dry signal
and the applied effect in this block.