TC Electronic G-Major, User Manual

Page: 13 / 52

11
BASIC SETUPS
Connecting and Setting up the G•Major
Parallel Setup using a Line Mixer
• Connect the Output of your preamp to the
Input of the Line Mixer.
• To be able to switch preamp channels with
the G•Major connect the Relay Jack
connection on the G•Major to the channel
switching jacks on the preamp.
(this does not apply for MIDI preamps).
• Connect the Line Mixer Loop Outputs to the
G•Major Inputs and the G•Major Outputs to
the Line Mixer Loop Inputs.
• Connect the Line Mixer main Outputs to
your amplification.
The Illustration shows Combos - these could
also be a power amp, and the Preamp could
easily be the Preamp-section of a Combo
amplifier.
Combined Setup with Regular Effect
Pedals, a G•Major and a MIDI pedal
• Connect the Combo’s Effect loop Out to the
G•Major Input.
• Connect the G•Major Output to the Effect
loop Input.
• Connect your guitar to your pedals and your
pedals to the Input of the Combo as usual.
• If you wish to switch presets on the G•Major
e.g. including Channel switching of the
Preamp/Combo you should also connect a
MIDI pedal to the G•Major and use the
Relay Switching function.