background image

5

Quality

With the G•Major, TC Electronic introduces a Guitar Effects Processor in the “affordable” price
range. You should however not be deceived by the price as the G•Major delivers true top quality
processing with no unwanted coloring of your beloved guitar-tone. As one of the leading companies
in the business of signal processing the vast amount of knowledge and experience concentrated at
TC Electronic is all for your benefit. Though each product is unique it is worth noticing the success
and achievement gained on other products from TC Electronic. Prices won for astounding Reverb
quality, Compression techniques and numerous other classic TC effects such as Dynamic Delay
and Chorus guaranties also the quality of this product. Logical operation via the intuitive user
interface will let you setup a series of quality sounds accessible from any attached MIDI pedal in
just a few minutes.

The quality of the effects in the G•Major are guaranteed, but furthermore we are confident that once
you have spend a few hours twisting the few controls on the G•Major, assisted with this manual,
you will start to appreciate the numerous possibilities within the G•Major.

About this manual

The latest manual revision and translations can be downloaded via www.tcelectronic.com
If you have questions unanswered by this manual try looking at our TC Support Interactive site. This
site is also accessed via www.tcelectronic.com

INTRODUCTION

Summary of Contents for G-Major





















































Reviews: