background image

47

APPENDIX 

- TECHNICAL  SPECIFICATIONS

Digital Inputs and Outputs

Connectors:
Formats:
Output Dither:
Sample Rates:
Processing Delay:
Frequency Response DIO:

Analog Inputs

Connectors:
Impedance, Bal / Unbal:
Max. Input Level:
Min. Input Level for 0 dBFS:
Sensitivity:
A to D Conversion:
A to D Delay:
Dynamic Range:
THD:
Frequency Response:
Crosstalk:

Analog Outputs

Connectors:
Impedance Balanced /
Unbalanced:
Max. Output Level:
Output Ranges:

D to A Conversion:
D to A Delay:
Dynamic Range:
THD:

Frequency Response:
Crosstalk:

EMC

Complies with:

Certified to:

Environment

Operating Temperature:
Storage Temperature:
Humidity:

Control Interface

MIDI:
Pedal:
Relay closure (separate tip
and ring connection to
sleeve):

General

Finish:

Display:
Dimensions:
Weight:

Mains Voltage:
Power Consumption:
Warranty Parts and labor:

RCA Phono (S/PDIF)
S/PDIF (24 bit), EIAJ CP-340, IEC 958
HPF/TPDF dither 24/20/16/8 bit
44.1 kHz, 48 kHz
0.1 ms @ 48 kHz
DC to 23.9 kHz ± 0.01 dB @ 48 kHz

1/4" phone jack, balanced
21 kOhm / 13 kOhm
+24 dBu
0 dBu
@ 12 dB headroom: -12 dBu to +12 dBu
24 bit, 128 x oversampling bitstream
0.65 ms / 0.70 ms @ 48 kHz / 44.1 kHz
100 dB typ, 20 Hz - 20 kHz
typ < 92 dB (0,0025 %) @ 1 kHz
+0/-0.1 dB @ 48 kHz, 20 Hz to 20 kHz
<-95 dB, 20 Hz to 20 kHz

1/4" phone jack, balanced 

40 Ohm
+20 dBu (balanced)
Balanced: 20/14/8/2 dBu
Unbalanced: 14/8/2 dBu
24 bit, 128 x oversampling bitstream
0.63 ms / 0.68 ms @ 48 kHz / 44.1 kHz
104 dB typ, 20 Hz to 20 kHz
typ <-94 dB (0.002 %) @ 1 kHz, 
+20 dBu Output
+0/-0.5 dB @ 48 kHz, 20 Hz to 20 kHz
<-100 dB, 20 Hz to 20 kHz

EN 55103-1 and EN 55103-2 
FCC part 15, Class B, CISPR 22, Class B
IEC 65, EN 60065, UL6500 and CSA E65

32° F to 122° F (0° C to 50° C)
-22° F to 167° F (-30° C to 70° C)
Max. 90 %  non-condensing

In/Out/Thru: 5 Pin DIN
1/4"  phone jack

1/4"  phone jack 

Anodized aluminum front
Plated and painted steel chassis
23 character / 280 icon STN-LCD display
19" x 1.75" x 8.2" (483 x 44 x 195 mm)
4.1 lb. (1.85 kg)

100 to 240 VAC, 50 to 60 Hz (auto-select)
<15 W
1 year 

Due continuous development these specifications are
subject to change without notice.

Summary of Contents for G-Major





















































Reviews: