TC Electronic DB6, Manual

Page: 5 / 76

Important safety instructions
English Manual (2014-03-05) 1
Important safety
instructions
1.
Please read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
8. Install in accordance with the manufacturer’s
instructions.
9. Do not install near heat sources such as ra-
diators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.
10. Only use attachments/accessories specified
by the manufacturer.
11. Refer all servicing to qualified service per-
sonnel. Servicing is required when the ap-
paratus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not oper-
ate normally, or has been dropped.
Warning
– To reduce the risk of fire or electrical shock,
do not expose this equipment to dripping or
splashing and ensure that no objects filled
with liquids, such as vases, are placed on the
equipment.
– Do not install in a confined space.
Service
All service must be performed by qualified per-
sonnel.
Caution
You are cautioned that any change or modifi-
cations not expressly approved in this manual
could void your warranty.
EMC/EMI
This equipment has been tested and found to
comply with the limits for a Class B Digital de-
vice, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in resi-
dential installations. This equipment generates,
uses and can radiate radio frequency energy and
– if not installed and used in accordance with the
instructions – may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interfer-
ence to radio or television reception – which can
be determined by turning the equipment off and
on –, the user is encouraged to try correcting
the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equip-
ment and the receiver.
– Connect the equipment to an outlet on a cir-
cuit different from the one to which the receiv-
er is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
For the customers in Canada
This Class B digital apparatus complies with Ca-
nadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.