TC Electronic DB6, Manual

Page: 39 / 76

Recalling, storing and deleting settings
English Manual (2014-03-05) 35
– You will be asked to confirm this operation be-
fore the preset is actually deleted.
Operating the unit while deleting presets
Please note that even when deleting presets, the
faders for the previously accessed page are still
available and operational. This means you can
continue operating the faders even when the
keyboard is shown on screen.
Library – Bank page
Library – Bank page
Use the Library Bank page of the TC Icon soft-
ware to copy Scene, Routing, Engine and Meter
Presets from one location to another.
You can copy Scene, Routing, Engine and Meter
Presets
from and to Banks and files.
Files can be transferred to other computers, al-
lowing you to easily reuse your presets.
To access the Library Bank page:
– If it isn’t already, select the device you want to
control using the Select page – see “TC Icon
modes: Base and Device operation” on page
20
– Select the “Library” tab.
– Select the “Bank” page.
– Select the subpage for the setting type you
want to copy:
– Scene – to copy Scene presets.
– Route – to copy Routing presets.
– Engine – to copy Engine presets.
– Meter – to copy Meter presets.
To copy from a Bank to a file on disk
– Select “From Bank” in the first column. The
second column will switch to “To File” accord-
ingly.
– Specify the folder where the file should be
written in the “File Folder” field.
– If you want to overwrite an existing file, select
it in the right column.
If you select “New file” instead, you will be
prompted to specify the file name.
– Click the “Copy Bank” button.
To copy from a file on disk to a Bank
– Select “From File” in the first column. The sec-
ond column will switch to “To Bank” accord-
ingly.
– Specify the folder from where the file should
be read in the “File Folder” field.
– Click the “Copy Bank” button.