TC Electronic DB6, Manual

Page: 27 / 76

Obtaining DB6 status information
English Manual (2014-03-05) 23
Obtaining DB6
status information
Please note that the LEDs on the front of a DB6
will display basic status information as long as
the device is powered – see “Front panel indica-
tors” on page 12.
Additional status information can be displayed
using TC Icon.
To display status information about DB6, go to
Frame / System / Status.
DB6 Single/Multi Status page
DB6 AES Status page
This page will display the following status infor-
mation:
Clock section
Source indicator
Indicates the source of the clock signal DB6 is
currently following.
Lock indicator
Indicates wether synchronization has been
achieved. If no synchronization has been
achieved, a red LED will be shown in this field.
Sample Rate indicator
Shows the detected sample rate of the signal
DB6 is synced to.
Status section
Power indicator
Displays the current state(s) of the power sup-
plies DB6 is connected to.
A power supply failure may be indicated as de-
scribed in the following section.
Sync indicator
The states and color codes shown here are the
same as those shown by the respective DB6
Sync LED – see “Sync LED(s) – SDI” on page
12.
Alert indicator
The states and color codes shown here are the
same as those shown by the respective DB6
Alert LED – see “Alert LED” on page 12.
Signal indicator
The states and color codes shown here are the
same as those shown by the respective DB6 Sig-
nal LED – see “Signal LED” on page 13.
Temperature indicator
Shows the current internal temperature of DB6.