TC500K3US-O Installation Instructions
44
As a whole, the inverter must not be disassembled either in
transportation or in installation. Any failure caused by the
modification without any authorization from TBEA is not covered
within the warranty scope.
The inverter cannot tilt, shake violently or bear force suddenly, such
as a sudden lay-down or uplift during the moving process.
Parameters marked shall be read carefully, in order to select the
appropriate means of transport and storage sites.
You must strictly avoid storing the inverter on the surface that does
not meet the requirements for any deformation of the inverter as a
result.
The forklift is used to move the inverter by the user as far as possible
according to the recommendation, and the weight and size of the
machine shall be always noted.
Cables of DC input and AC main power are proposed to be laid out
before the inverter cabinet is moved to the predetermined position.
Because the cables are thick, as soon as the inverter cabinet is
installed, the cable wiring is very difficult to carry out.
7.1.2 Packaging and Logos
An integrated package is required for the inverter during the
transportation, ensuring to provide good protection for the inverter, and the
operation shall strictly follow the various indications on the package. The
