TBB Energier Pro Series, User Manual

Page: 3 / 56

Energier pro User Manual
Disclaimer
About this Manual
Unless specially agreed in writing, TBB Power Co., Ltd
Take no warranty as to the accuracy, sufficiency of suitability of any technical or other information
provided in this manual or other documentation.
Assumes no responsibility or liability for loss or damage, whether direct, indirect, consequential or
incidental, which might arise out of the use of such information
TBB offer standard warranty with its products, taking no responsibility for direct or indirect loss due to equipment failure.
Thank you for choosing our product, this is the user manual for the Energier pro bi-directional inverter.
1) Please check the input voltage or battery voltage is the same as the nominal input voltage of the inverter.
2) Please connect positive terminal “+” of battery to “+” input of the inverter.
3) Please connect negative terminal “-” of battery to “-” input of the inverter.
4) Please use the shortest cable and ensure the connection is secure.
5) While connecting, please secure the connection and avoid short cut between positive terminal and negative terminal of
battery, which will cause damage of battery.
6) Inverter will have high voltage inside. Only authorized electrician can open the case.
7) The inverter WAS NOT designed to use in any life retaining equipment.
General Instruction
Thanks for choosing our products and this manual were suitable for Energier pro bi-directional inverter.
This chapter contains important safety and operation instructions. Read and keep this user guide safe for later reference.
The Energier pro bi-directional inverter needs to be installed by professionals and please pay attention to the following points
prior to installation: