TBB Energier Pro Series, User Manual

Page: 35 / 56

Energier pro User Manual
29
5. Pre-Installation
The unit is packed with following materials. Please confirm the series number on Energier pro bi-directional inverter is same to that on
outer carton.
Energier pro bi-directional inverter
TS – battery temperature sensor
VS – battery voltage sensor
（
optional
）
User’s manual
Working temperature
：
-10
℃
-55
℃
Storage temperature
：
-40-70
℃
Relative Humidity
：
0%-95%
，
non-condensing
Cooling
：
Forced air
5.1 Material list
Please install the equipment in a location of Dry, Clean, Cool with good ventilation.
5.2 Location
Please find the following minimum wire size. In case of DC cable longer than 1m, please increase the cross section of cable to reduce the loss.
5.3 Wiring recommendation
System capacity
AC wiring DC wiring
CF16xx
CF20xx
CF30xx
4 mm² 2.5 mm²
CF40xx
CF50xx
CF60xx
CF80xx
/
/
4 mm² 25 mm²
4 mm² 70 mm²
/
/
/
/ /
/
/
/
/
/
6 mm²
10 mm²
10 mm²
50 mm² 70 mm²
50 mm²
70 mm²
CF08xx
CF12xx 4 mm²
4 mm²
110 VAC
2.5 mm²
2.5 mm²
2.5 mm²
230 VAC
2.5 mm² 16 mm²
35 mm²
50 mm²
12 VDC
25 mm²
50 mm²
10 mm²
25 mm²
25 mm²
16 mm²
25 mm²
/
/
16 mm²
/
24 VDC 48 VDC