1.
Ensure that the connector at
the ends of the reinforcement
beam is firmly attached;
tighten the screws as
necessary.
2.
Attach the end connector to
the end gable with 1/4 #20
1-inch quadrex pan head
screws at the bottom, (Figure
1) and above, (Figure 2).
3.
Proceed to attach the other
end of the reinforcement bar
to the required gable.
end reinforcement bars
to open end gable
tools & hardware needed
drill
1/4 #20;1" quadrex
pan head screw
#2 robertson
long bit
Figure 1
Figure 2
NOTES:
> Bottom screws should be tightened
first, then the top screws.
26 Scene
MARCH 2016
