1.
Install two low credenza
worksurface supports 5-3/8
and 7-1/16 inches from the
edge of the worksurface with
#10; 1-inch oval head screws
(Figure 1).
2.
Mount the worksurface above
the credenza and secure the
flush plates to the surface with
#10; 1-inch oval head screws
(Figure 2).
3.
Align the credenza to the
worksurface.
low credenza to wide worksurface
fixed supports
#2 Robertson
long bit
tools & hardware needed
drill
Figure 2
Figure 1
7-1/16 inches
5-3/8 inches
CREDENZA TOP
CENTERLINE
#10 1" oval
head screw
34 Scene
MARCH 2016
