The wire management trough
mounts to the underside of a
reinforcement bar to manage power
and communication cables
horizontally below the worksurface
level. Also, the power and/or
communication box can be mounted
to channels on the trough.
1.
Ensure the worksurface is
properly supported and all
brackets are secured.
2.
Position the worksurface wire
management trough at the
specified location (Figure 1).
Use #10 1" oval head screws to
attach the wire management
trough to the underside of the
reinforcement bar, (Figure 2).
wire management trough to surface
measuring
tape
tools & hardware needed
drill
# 2 Robertson
long bit
FIGURE 1
FIGURE 2
# 10x 1"
pan screws
45 Scene
MARCH 2016
