1.
Along the center of the
worksurface, install the low
credenza worksurface support
7-1/16 inches from the edge of
the worksurface with #10;
1-inch oval head screws
(Figure 1).
2.
Mount the worksurface above
the credenza and secure the
reinforcement beams to the
surface (Figure 2).
low credenza to
worksurface fixed support
#2 Robertson
long bit
tools & hardware needed
drill
Figure 2
Figure 1
7-1/16 inches
WORKSURFACE
CENTERLINE
CREDENZA TOP
CENTERLINE
#10 1" oval
head screw
35 Scene
MARCH 2016
