1.
To install the screen post, place
worksurface face down on a
solid surface or floor. Place a
wooden block underneath the
pre-drilled holes and level the
worksurface. Drill through the
pre-drilled holes with a 5 mm
V-point drill bit, (Figure 1).
2.
Flip the worksurface and place
it on top of the assembled
worksurface supports or
elevated surfaces with the
topside facing up. Place screen
post in position shown in
(Figure 2). Use four screws (4)
to attach the screen post to the
surface.
screen post to surface
IMPORTANT NOTES:
Do not drill all the pre-drilled
holes, drill only where required
as per furniture layout
configuration.
Check the layout for post
positioning.
torpedo level
tools & hardware needed
drill
# 2 Robertson
long bit
5 mm V-point
drill bit
FIGURE 1
FIGURE 2
#8 x 2" Washer
head screw
wooden block
measuring
tape
17 Scene
MARCH 2016
