75
Warranty
Unless otherwise stated in the contract, the warranty period is 5 years from date of invoice. If agreed to otherwise,
the contract conditions apply. No warranty is given in the case of …
a) … the warranty period having run out during the period of storage with the customer.
b) … the operating conditions, ambient conditions, transport and storage conditions have not been adhered to
according to the application description or the Installation and Operating Instructions.
c) … an unauthorized manipulation of the device has been carried out, such as opening the housing or damaging the seal.
d) … the device has not been properly installed, such as incorrect connection voltages.
Quality Regulations
All manufacturing facilities of the company have been
certified by KEMA in the Netherlands and comply with
(DIN EN) ISO 9001:2000.
All technical data of the vacuum circuit breaker are stored
in an electronic database for each step of the manufactu-
ring process. Testing of the circuit breakers is carried out
in accordance with the relevant standards and beyond that
the following test are carried out:
· 1000 C-O cycles
· Insulation strength of the primary and auxiliary circuits
at operating frequency
· Measurement of the resistance of the main circuit
· All test results are automatically stored
Complaints and
Trans port Damage
All products are shipped exclusively with original packing
to ensure safe transport and avoid transport damage
(see Packing, Goods Received).
Tavrida Electric will not accept any claims for damages
caused by improper transport, storage as well as
unpacking. Obvious transport damage must be reported
in writing to the supplier as soon as it is discovered. The
warranty forms are to be used for this purpose. A period
of maximum 3 weeks after receipt is allowed for this.
For legitimate claims Tavrida Electric will supply replace-
ment equipment free of charge according to our warranty
regulations. Tavrida Electric reserves the right to verify
any claim.
12
Summary of Contents for ISM Shell_2 Series
