TAVRIDA ELECTRIC ISM Shell_2 Series, Applications Manual

Page: 18 / 83

18
3
Arrangement of the labels (Figures 16, 17):
3 1 2
ISM
1. Rating plate
2. Serial number
3. Seal
CM
1. Seal
2. Serial Number, date of manufacturing
3. Product code
Figure 17
Labelling ISM
Figure 18
Labelling of the CM_16
The manufacturer accepts no warranty for a device if the seal is broken or has been removed.
Storage
Should immediate installation not be possible, the ISM and CM shall be stored in the original packing under the
following conditions:
· The ISM is switched off.
· Dessicants must be placed in the packing.
· Storage must be dry, well ventilated and the room temperature should be between - 40°C and + 40°C
(IEC694/ DIN VDE 0670 Part 1000).
· If several ISM are stacked a maximum of two layers is permitted.
· If several CM are stacked a maximum of 10 vertical layers is permitted.
If CM are stored longer than one year, the built-in capacitors shall be charged according to the following procedure before
putting into operation:
· Switch On auxiliary power supply to CM for 20 seconds.
· Switch Off auxiliary power supply to CM for one minute.
· Repeat the described switching on and off procedure two times.
· Switch On auxiliary power supply to CM for at least 8 hours.
2
3
1