X5.1
17
Step 4:
Assembly of arm bars
(1)
Mount the left (15) and right (16) arm bars on the pedal arms with six hex head
screws (76), four spring washers (113) and six nylon nuts (91).
(2)
Mount the front (L)(69) and rear arm bar cover (L)(69~1) together on the left arm
bar with three sheet screws (87).
Repeat the process for the right side.
(3)
Mount the left (L)(42) and right (R)(43) console mast cover on the console mast
with two sheet screws (87).
Then check again to see if all screws and nuts have been tightened.
Summary of Contents for TF-X5.1
