X5.1
14
3.2
Assembly instructions
Before starting assembly, look carefully through the individual assembly steps shown
and assemble the equipment in the order indicated.
Unpacking the machine
(1)
Carefully remove all parts from the carton and check the content for missing
or damaged parts. If parts are missing or damaged, contact your contract partner
immediately.
(2)
Take the tools out of the screw and tool set. The screw set is divided according to
the steps of assembly. In order to avoid confusion, only take out the parts that you
need for the next step.
Step 1:
Assembly of front supporting foot and pedal bars
(1)
Mount the front supporting foot (14) on the plate, which is located on the lower
end of the frame, with two carriage bolts (77), two spring washers (112) and two cap
nuts. The transport wheels must point forward.
(2)
Mount the two wheel covers (65) on the left and right pedal arm (5) with four
Phillips screws (82).
(3)
Slide the shaft of the left pedal bar (7) into the socket of the left pedal arm (5) and
mount it with an Allen screw (80-1), a washer (104-1). Repeat the process for the right
side.
Summary of Contents for TF-X5.1
