VT5
12
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
2.3.1
Assembling the training bands with handles
⚠
CAUTION
+
Before each use, thoroughly check the training band is securely fixed onto the plate.
+
As soon as any damage on the training band or handle is visible, please stop using them
immediately to prevent injuries from occurring.
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
1. On the underside of the plate the is a loop built on each side. Press the end of the training band
together and push it through the loop (see Fig. 1 and Fig. 2)
.
2. Thread the handle through the training band and pull it tight (see Fig. 3 and Fig. 4).
3. Please repeat the steps 1 and 2 off the second training band.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
