VT5
17
3.7.2
Remote control
L
NOTICE
The remote control can only be used within a radius of 2.5m from the plate.
1. To select the required function, press the respective function button on the remote control.
2. After choosing the function, the length of training can be set with the increase / decrease time
buttons (21 & 24) between 1 and 10 minutes.
3. To start training, press the Start/Stop button (20).
The chosen function begins.
4. During training the speed level can be adjusted using the increase / decrease speed buttons
(22 & 23).
5. To stop training or to choose another function, press the Start/Stop-button (20).
3.8
Automatic mode
There are three programs available in automatic mode.
L
NOTICE
During the automatic mode it is not possible to makes changes to the length and speed settings.
3.8.1
Control bar
1. To select a program, press the Mode button (9). Press the button repeatedly to select the
program required.
2. To start training, press the Start/Stop button (12).
The chosen program begins.
The display changes between the time and speed values every 5 seconds.
3. To stop training or to choose another program, press the Start/Stop button (12).
3.8.2
Remote control
L
NOTICE
The remote control can only be used within a radius of 2.5m from the plate.
1. To select a program, press the Mode button (19). Press the button repeatedly to select the
program required.
2. To start training, press the Start/Stop button (20).
The chosen program begins.
3. To stop training or to choose another program, press the Start/Stop-button (20).
