VT5
23
5.3
Error Codes and troubleshooting
The electronics of the equipment continuously carries out tests. In case of deviations, an error code
appears on the display and normal operation is stopped for your safety.
ER01
Power outage of the
operating current for the
motor
Unplug the vibration plate from the mains supply. Re-
insert the power cable and re-start the plate.
Should the error persist, please contact your contract
partner.
ER02
Please contact Sport-Tiedje for technical support.
5.4
Maintenance and inspection calendar
To avoid damages from sweat, the vibration plate must be cleaned with a damp towel (no solvents!)
after each training session.
The following routine tasks must be performed at the specified intervals:
Part
Weekly
Monthly
Quarterly
Half-yearly
Yearly
Display console
C
I
Plastic covers
C
I
Screws and cable
connections
I
Training bands and
handles
C, I
Legend: C = clean; I = inspect
6
DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in normal household waste.
Instead, it must be disposed of via an electricals recycling centre. Further information can be
obtained from your local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling
of materials or other forms of recovery of old equipment, you make an important
contribution to the protection of the environment.
