18
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
RCP² 1500
Adjustments and operations
Cutting height adjustment
Adjus the equipment on a flat place, being it properly hitched to the tractor .
The blades cutting height is determined by the side skids (A), which feature an up and
down adjustment with the help of the bolts (B).
The cutting height must be set according to the soil type, avoiding that the
blades touch the soil frequently.
For a better performance, we recommend that the cutting height should be
no less than 40 mm from the soil.
Every time the cutting height is changed or a tractor with a different height
in the drawbar is used, it is necessary to check the rotary cutter level again.
It is important to reach a 540 rpm speed in the PTO before starting the cutting
process.
NOTE
A
A
B
B
B
B
A
A
B
B
Drawbar extension adjustment (Third-point articulation)
Use the upper arm from
the third point (A) to adjust
the drawbar extension (B),
in a way that it stays slightly
tilted back, according to
the figure. Therefore, the
articulation will be enough to
follow the unevenness of the
soil surface.
