25
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
RC² 2600 CL / RC² 2600 LSL / RC² 3100 CL
Adjustments and operations
Drawbar extension adjustment (Third-point articulation)
Slip clutch
The slip clutch are factory preset, requiring no adjustment in order to start the
equipment operation.
When the equipment faces an overload, the slip clutch will start to work. It is necessary
to raise the equipment immediately to relief from the overloading.
NOTE
When facing a great amount of vegetation or if the cutting resistance is
excessive, try to work a narrow strip or decrease the working speed.
Use the upper arm from the third point to adjust the drawbar extension, in a way that it
stays slightly tilted back, according to the figure. Therefore, the articulation will be enough
to follow the unevenness of the soil surface.
