23
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
RC² 2600 CL / RC² 2600 LSL / RC² 3100 CL
Set-up instructions
Direction of blades rotation and serial number
Daily working preparation
The RC² 2600 CL, RC² 2600 LSL and RC² 3100 CL models have blades that turn in
different directions (clockwise and counterclockwise), so the blades can lift and cut the
vegetation that is inclinated or lying on the ground.
The blades have double cut, allowing to use them on both sides and for a long
time. In order to do so, put the blades that are turning in a clockwise direction
in the support that is turning in a counterclockwise direction and vice versa.
NOTE
RC² 2600 CL -
Duromark blades ...................................................
06.22.40.0057
RC² 2600 LSL -
Duromark blades ...................................................
06.22.40.0057
RC² 3100 CL -
Duromark blades ...................................................
06.22.40.0057
Before starting working it is advisable to do a complete check on the rotary cutter.
Retighten nuts and bolts.
Lubricate every grease fitting appropriately. (See lubrication instructions on page 30).
Counterclockwise
Clockwise
