17
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
DCA DC 2500, 5500 & 7500
Set-up instructions
DCA DC leveling
After hitching the drawbar, check the horizontal leveling of the spreader. If required,
make any adjustment as follows:
Consult the tractor manual and be sure about the possible working positions with the
hitch bar. Use the height that provides the best leveling of the equipment.
First of all, verify the length of the cardan shaft in the following way:
• Separate the cardan shaft and couple the 'female' part to the PTO.
• Steer the tractor wheel until it touches the spreader drawbar.
• Couple the 'male' part to the spreader. Being the bars placed side by side, verify the
existence of a minimum free space of five centimeters between the male and female part
in each end.
Coupling the cardan shaft to the PTO
NOTE
The adjustment range of the tractor drawbar can be used for shortening it
or lengthening it.
5 - 7 cm
5 - 7 cm
