TATA Motors 2013 Nano, Owner'S Manual

Page: 66 / 136

64
Connect Leads In The Order As
Shown In Sketch.
Following order should be
followed while connecting battery
leads :
1. Positive (+) of Good battery to
Positive (+) of discharged
battery.
2. Negative (-) of Good battery to -
a solid metal patch attached to
engine block OR unpainted
metal (Engine) part which is
away from the discharged
battery.
3. Crank and start the engine.
4. While disconnecting follow
reverse order i.e. disconnect
Negative (-) lead followed by
Positive (+) lead.
Towing the Vehicle :
• For towing a vehicle, the best
way is to use a wrecker.
• Alternatively use a rigid tow bar.
• Avoid using a flexible cable or
rope as your vehicle may crash
into the vehicle towing your car
when it stops suddenly.
• Switch ‘ON’ the hazard warning
signals of both the vehicle to
warn other road users.
• Where possible, keep the engine
idling so that brake vacuum is
available.
• Limit the speed to 20-30 kmph.
• In case of brake failure, use the
parking brake to control the
vehicle.
INCASE OF EMERGENCY
NOTE : Do not connect negative
( - ) terminal if jump start battery
(Good battery) to the negative ( - )
terminal of discharged battery.
This may lead to an explosion.
START WITH JUMP LEAD