TATA Motors 2013 Nano, Owner'S Manual

Page: 74 / 136

72
Fuses and Relays :
Your car’s electrical circuits have
fuses to protect the wiring from short
circuits or sustained overload. These
are located below dash board on
right hand side as shown in the
sketch.
The circuit is connected through
fuses and relays and the current
rating of each fuse is printed on the
fuse box sticker on sunvisor.
Checking and replacing fuses:
If any electrical unit in your car is not
functioning, check the fuses first.
Please follow the steps below that
will guide you to check and replace
them -
• Turn the ignition key to the
'LOCK' position.
FRONT
• Identify the defective fuse from
it’s melted wire.
• Remove blown fuse by fuse
puller.
The fuse puller is located
in the cabin compartment fuse
box.
• Find the route cause of the
blown fuse and rectify.
• Install a new fuse of the correct
rating.
• Ensure that all other fuses are
firmly in position. Spare fuses are
provided in the fuse box in the
cabin.
CAUTION
The electrical system is protected
by fuses that are designed to fail
and prevent damage to wiring
harness. Always replace blown
fuse with the same rating as
specified to prevent wiring
damage that can result in a
possible fire.
A. FUSE & RELAY BOX
B. BATTERY MOUNTED FUSE BOX
ELECTRICAL MAINTENANCE
FUSES & RELAYS