TATA Motors 2013 Nano, Owner'S Manual

Page: 21 / 136

19 19
AN OVERVIEW
GAUGES & INDICATORS
Front Fog Lamp
Indicator (If equipped) :
Front fog lamps are provided on the
front bumper to improve the visibility
in foggy weather. The front fog lamp
switch is provided on combi switch.
High Beam
Indicator :
The indicator light comes on when
the High beam is selected or also
when he headlight flasher is
operated.
Check Engine
lamp:
This symbol indicates the car’s
engine condition.
1. It comes ON when ignition is
switched ON and once engine
is cranked, it goes OFF.
2. It remains ON if there is a
problem in any of the engine
components.
NOTICE
If the Service lamp remains ON
when the engine is running, the
engine’s performance deter-
iorates marginally & sometimes
significantly. Take your car to a TATA
Authorised service centre.
Malfunction Indication
Lamp:
This lamp indicates your vehicle’s
engine condition when a
malfunctioning occurs in the engine,
wiring harness, EMS, etc. which
affects the emission norms this
lamp indicates as below:
1. Comes ‘ON’ when key is in ‘IGN’
position and goes ‘OFF’ when
engine is running.
2. Remains “ON” while the engine
is running if malfunctioning occurs.
3. Starts ‘BLINKING’ if continuous
problem of malfunction is observed,
contact nearest Tata Authorised
service outlet.
CAUTION
When “MIL” indicator is ON or
blinking while the engine is
running, the engine’s
performance deteriorates
marginally and sometimes
drastically. Please get the
malfunctioning rectified at a
nearest authorized service center.
Low Engine Oil
Pressure Indicator :
This symbol lights up when the
ignition switch is turn to the ‘ON’
position and goes out as soon as
the required oil pressure is
developed after starting the engine.
The light will remain ‘ON’ if there is
insufficient oil pressure. If light
comes on when driving, contact
nearest Tata Authorised service
outlet immediately. Check the oil
level and add oil if necessary.
NOTICE
If the low oil pressure indicator
does not glow or continues to
remain ‘ON’ even with sufficient
oil when the engine is running, it
indicates a fault in the electrical
circuit/lubrication system. Check