background image

25

25

STEERING LOCK CUM IGNITION SWITCH

AN OVERVIEW

Steering Lock cum Ignition Switch:

Key of ignition switch is common
for door lock & steering lock.

The ignition switch is on the right
side of the steering column. The
switch has four positions.

LOCK

-

Steering Locked

ACC

-

All accessories
function ‘ON’.

ON

-

Vehicle ON and all
electricals ‘ON’

START

-

Engine crank

LOCK:

You can insert or remove the key
only in this position. The steering
column is locked when the key is
removed.

ACC :

By turning key to ACC (key in)
position, all accessories function
like music system will be ‘ON’.

ON :

Engine running and all electrical
gadgets and accessories ON.

START :

Turn the key further clockwise to the
START position (spring loaded) to
start the engine. As soon as the
engine starts release the ignition key
to ON position. While cranking, all
accessories will be momentarily
‘OFF’.

NOTICE

Do not crank the engine more than
10 seconds continuously. If the
engine does not start wait for 15
seconds before cranking it again.
Release the key immediately after
starting the engine.

By turning the ignition key from ‘ON’
position to ‘ACC’ position, engine
can be stopped.

Summary of Contents for 2013 Nano









































































































































Reviews: