TATA Motors 2013 Nano, Owner'S Manual

Page: 109 / 136

107 107
Phenomenon of multiple reflections
from hills and tall buildings may
result in no reception or poor
reception known as multipath effect.
5.3. Tuner operation
5.3.1. Frequency Band Select
Press key to access the selected
frequency bands FM1, FM2 or AM.
The radio will display Tuner band
and frequency to show that the radio
is in the tuner source.
5.3.2. Auto seek
In tuner mode, you can execute an
automatic seek for the next active
infotainment radio station broadcast
within the currently selected
frequency band.
Press and Hold the / key to
execute an upward / downward
frequency auto seek.
During the auto frequency, LCD will
display the frequency of each valid
infotainment radio.
If no valid station found then the seek
function stop at one round (stop at
the frequency where tuner start
seeking. During an auto seek
process; if user presses any preset
buttons then corresponding station
will be played.
5.3.3. Manual Frequency Tuning
When the radio is in FM or AM mode,
short press the
/ button to
step up/down the frequency band by
one step.
LCD display will show current
frequency.
AM frequency step is 9 kHz and FM
frequency step is100 kHz..
5.3.4. Auto store
When radio is in tuner mode, a long
press on
will execute the auto
store function.
When the auto-store starts, the radio
will sweep the frequency band and
try to locate the 6 strongest radio
stations and store their frequencies
into associated FM1/FM2/AM
memory locations 1 - 6. The store
sequence is from strongest to
weakest (1 to 6).
When auto-store has finished, the
radio will switch to the FM1/FM2/AM
band at preset location one.
If no active radio stations are located
during the auto store operation, the
radio will recall preset 1 frequency.
During auto storage process, if seek
button is pressed then the ongoing
process will be stopped and preset
1 will be played.
During auto storage process, if any
preset button is pressed then
corresponding station will be
played.
5.3.5. Tuner preset 1 to 6
Preset functionality allows storing or
selecting a given radio frequency
within one of the reception ranges
(FM1, FM2 and AM).
The audio channels are briefly
muted (during the storing period) to
acknowledge the preset has been
stored and the display panel
MUSIC SYSTEM - OPERATOR’S MANUAL