119
119
MUSIC SYSTEM - OPERATOR’S MANUAL
in BT mode. Infotainment will
display the phone name of the
active phone. Only the first 8
characters of the phone name
will be displayed.
CAUTION
In any source mode, the user can
process a BT phone connection
from the BT phone, if the
connection has succeeded, the
BT phone will be paired and
connected. But the Infotainment
will still be in current source mode
(tuner, CD, USB, AUX).
CAUTION
Your Infotainment system can
support only one Bluetooth device
pairing at a time. You cannot use
your Infotainment system to pair
two cell phones concurrently.
No connectivity :
•
If the system cannot fetch the
name of the BT phone, “BT
PHONE” will be displayed
•
If the paired phone is not in
vicinity or not connected to the
Infotainment system, the system
will display “NO PHONE”.
CAUTION
Once in the Bluetooth mode, the
user can only use the Volume Up/
Down, Cal Accept/ Call Reject, &
Next Track/ Previous track buttons.
The user is required to come out of
the Bluetooth mode to access the
other Trimplate buttons.
9.2. Hands Free calling :
9.2.1. Incoming Calling :
•
During power ON, if a call is in
progress, the Infotainment
system will enter into the BT HFP
Mode automatically. The HFP
mode is entered/ exited by
means Short Press the [ ] Accept
button.
•
When an incoming call arrives,
the Infotainment system is
muted automatically and ring
tone is reproduced through your
car’s speaker.
•
The unit temporarily switch to
telephone mode and incoming
call no. will appear on the display.
NOTICE
•
The unit will be automatically set
as default speaker output every
time when there is an incoming
call.
•
Caller ID is telephone number
of the incoming call.
•
Only first 8 digits of the number
will be displayed.
Summary of Contents for 2013 Nano
