TATA Motors 2013 Nano, Owner'S Manual

Page: 61 / 136

59 59
DRIVING
ADVANCE WARNING TRIANGLE &
HAZARD WARNING SWITCH
Advance Warning Triangle : Hazard Warning Switch :
An advance warning triangle is
provided along with your vehicle. In
case there is a breakdown and or the
vehicle is to be parked at the side of
road, then the triangle is to be used
as per instructions given below:
1. Remove advance warning triangle
from it’s cover and assemble.
2. Place the triangle on the road
behind the vehicle where it is
stranded.
3. The triangle must be at least 50
meters behind the vehicle in the
same lane of traffic.
4. Increase the distance to 150
meters on a highway or if a bad/
hill top obscures the view.
Use Hazard Warring lights besides
advance warning triangle in case of
breakdown specially during night
time and vehicle has to be parked at
the side of the road or vehicle is being
operated in adverse condition.
This can be operated without
ignition 'ON'. Press the hazard
warning switch (red knob) on the
facia (below instrument cluster), all
side indicator lights will flash
simultaneously to warn the other
road users about any hazardous
condition of the vehicle. Depress the
knob again to switch 'OFF' the hazard
function.
CAUTION
If the turn signal indicators do not
blink, then there may be problem
in electrical system. If the
indicators “Blink rapidly”, then this
indicates that a side indicator bulb
has failed. Get it rectified
immediately.