TATA Motors 2013 Nano, Owner'S Manual

Page: 126 / 136

124
MUSIC SYSTEM - OPERATOR’S MANUAL
The fade level will change in
accordance with the displayed
setting.
The default fade level will be 0
(centre).
When the fade is set to "0" front and
rear channels will have equal output
at the selected volume level.
When the Fade is set to Front 7 the
rear speakers will be inaudible and
the front speakers output will be at
the selected volume.
When the Fade is set to Rear 7 the
front speakers will be inaudible and
the rear speakers output will be at
the selected volume.
A short press of / button will
change the fade level by one step
from F7 to R7; this will attenuate the
output level of the Front / Rear
speakers in even steps
A long press of / button will
continuous change the fade level
from F7 to R7; this will attenuate the
output level of the Front / Rear
speakers in even steps.
Similarly balance control can be
used to control the audio output in
left & right speakers. L7….0….R7.
Settinng the value to 0 gives equal
output in left & right speakers.
Setting to L7 gives audio output only
in left speaker where as R7 will
produce the ouput only in Right
Speakers.
Equalizing Setting
You can adjust the audio EQ setting,
which will make the audio output
sensitive.
The audio output will change in
accordance with the displayed
setting.
The default Fade level will be
“Normal”.
Press / button to select the
favorite EQ setting when you enter
EQ setting mode.
The radio has five different EQ
setting, they are “Normal, Jazz, Pop,
Rock, Classic “.
The EQ setting is active via adjusting
the Bass and Treble setting.
Mute Control
Short press the power
button will mute the audio output
from head unit. Mute will be
cancelled by again pressing the
button.
After AFT or Auto seek, mute will be
automatically cancelled when user
changes to different band or different
preset. After AST or Auto Seek mute
will be disabled and audio output
will be enabled.
Similarly whenever there is a source
change mute will be disabled
automatically. In BT mode, Mute from
headunit will mute the audio output
of head unit whereas it sends the
PAUSE command to BT phone.
Similarly Unmute will unmute the
audio from headunit and it will send
PLAY command to BT Phone.