T&D VLD-5US User Manual Download Page 83

Page: 83 / 104

Operating the Graph

Returning to Original Size: from the [Graph] Menu

Clicking here will return the graph to its original size.

Zooming In and Out: from the [Graph] Menu

Zooms in or out one step at a time.

Moving the A/B Cursors Right and Left: from the [Graph] Menu

Simultaneously move the AB Cursors to the right or left.

Moving Right and Left on the Graph: from the [Graph] Menu

Move the Graph Display to the right or left.

Moving Up and Down on the Graph: from the [Graph] Menu

Move the Graph Display up or down.

Vertical Axis Settings: from the [Graph] Menu

Set the vertical axis scale (temperature).

Check either [Auto] or [Manual].

[OK]

button

Check

One

If [Manual] has been selected:
Enter the range of the vertical axis scale.

AUTO:

The vertical axis will automatically be changed according to the
values of the data.

MANUAL:

You can set the upper and lower values of the vertical axis scale.

Click the [OK] button to fi nish.

* By clicking the [Default] button, you will return to the settings when the

software was opened.

Summary of Contents for VLD-5US









































































































Search results

Summary of Contents for VLD-5US

Reviews:

T&D VLD-5US, User Manual, Page: 83 / 104

Search results

Summary of Contents for VLD-5US

Reviews: