manualshive.com logo in svg

T&D VLD-5US, User Manual, Page: 72 / 104

Share
Download
T&D VLD-5US User Manual Download Page 72

67

Ӵ

Button (

)for Moving Horizontal Axis and Horizontal Gauge Bar

By dragging the gauge you can move left and right to the data you 
want to be displayed. The horizontal axis moves by clicking these 
arrow buttons.

ӵ

Button (

) for Moving Vertical Axis and Vertical Gauge Bar

By dragging the gauge you can move up and down to the data you 
want to be displayed. The vertical axis moves up or down by clicking 
these arrow buttons.

Ӷ

A and B Cursor Position Information

The approximate date and time for the A and B cursor positions and 
the time difference between the A cursor and the B cursor is 
displayed.

ӷ

Channel Info List Display

The detailed data info for each channel 1 to 8 is displayed below the 
Graph Display.

Ⱥ

Zoom in Using the Mouse

Ȼ

With the left button drag the 
mouse to outline the area 
you want to zoom in on.

Ⱥ

Menu Display Using the Mouse

Ȼ

By right clicking on the 
graph, the Menu will be 
displayed.

Summary of Contents for VLD-5US









































































































Reviews:

No comments