manualshive.com logo in svg

T&D VLD-5US, User Manual, Page: 23 / 104

Share
Download
T&D VLD-5US User Manual Download Page 23

18

ɡ

Connecting with RS232C (Serial) Communication Cable

Connect the Data Collector with an RS232C (Serial) communication 
cable to your computer.

Examples of serial port marks

The communication cable connection is a 
D-Sub 9 pin female. Please connect it to a 
port that has markings such as these.

Serial Communication Cable 

(TR-07C)

Connect to 
the Data Collector

Connect the D-Sub 9 pin 
to the computer

Ȇ

 Make sure to connect it to the correct place to ensure communication. 

Ȇ

 To ensure that the communication cable is properly connected make sure that 

the plugs are completely inserted.

Ȇ

 When using the 57U Series Data Collector with RS232C (serial) communication, 

please use the optional serial communication cable TR-07C. 

Ȇ

 When using the 57C Series Data Collector with RS232C (serial) communication, 

please use the serial communication cable that is included with the product.

Summary of Contents for VLD-5US









































































































Reviews:

No comments