manualshive.com logo in svg

T&D VLD-5US, User Manual, Page: 10 / 104

Share
Download
T&D VLD-5US User Manual Download Page 10

5

Basic Procedures

ɡ

Getting Ready

1: Installing the T&D Recorder VLD for Windows

Install T&D Recorder VLD for Windows to the computer in which you 
wish to use it.
By installing T&D Recorder VLD for Windows, all applications 
contained will be installed, including User Management Tools, 
Archive Viewer, Remote Unit Registration Tools, Data Logger Settings 
Tools, and Temp/Humidity Graph. 

ʋ

pp.7

Ȇ

It is only possible to install to Windows 2000/XP.

Ȇ

Do not install both versions of the software T&D Recorder VLD for Windows and 

T&D Recorder for Windows (the provided software with each unit/collector) on 
the same computer.

2: User Registration (User Management Tools)

Set up and register all User ID's and Passwords that will be 
necessary for logging into the various T&D Recorder VLD for 
Windows applications, and register which operations will require 
operation authorization. 

ʋ

pp.11

3: Getting the Data Collector and Computer Ready for 

Communication

Install batteries, connect the communication cable and make 
communication port settings (USB communication or RS232C 
communication) so that the computer can carry out communication 
with the Data Collector. 

ʋ

pp.17

4: Getting the Data Logger(s) and Computer Ready for 

Communication

Place a Data Logger face down on a Data Collector connected to a 
computer to enable communication.

ʋ

pp.25

Summary of Contents for VLD-5US









































































































Reviews:

No comments