manualshive.com logo in svg

T&D VLD-5US, User Manual, Page: 47 / 104

Share
Download
T&D VLD-5US User Manual Download Page 47

42

RTR-51/52: Value Adjustment Function

This function enables the user to make adjustments to measured 
values to correct inaccuracies that may occur when compared to a 
standard or reference temperature measurement. By setting an 
adjustment equation beforehand, the adjustment function will 
automatically calculate to record and display the post-adjusted 
measurement. It is possible to select from two methods of 
adjustment: 1-point adjustment and 2-point adjustment.

¦

When you are carrying out adjustments and formulating equations please take 
care with the settings and take personal responsibility for the process.

ɡ

Temperature: 1-point Adjustment

Adjustment is carried out by entering the value of the difference 
between the displayed temperature measurement reading and the 
reference one to which it is being compared.

Ȇ

Please set so that the possible adjustment range is within 

Ⱦ

54 

ɋ

F.

Summary of Contents for VLD-5US









































































































Reviews:

No comments