TANDBERG RDX QuikStation, Product Manual

Page: 95 / 130

O
CTOBER
2011
RDX Q
UIK
S
TATION
85
The following RDX dock properties are displayed when you select an RDX
dock in the left pane of the Physical Device interface.
DOM version The Disk On Module (DOM) version that is
currently in use.
ADM version The Admiral board (ADM) firmware version that
is currently in use. The Admiral board enables
communication to the center-front LED panel,
dock LCD panels, fans, and system sensors.
Table 6-2 RDX dock properties
Property Name Description
Dock status Displays the operating status for the RDX dock.
The status displays either “good”, “offline”, or an
error state. For information on running a dock
diagnostic test, see page 95 .
Dock LCD text The cartridge label text that is displayed on the
LCD dock panel. This field is populated only if
an RDX cartridge is inserted in the dock.
Dock FW rev The RDX dock firmware version.
With a cartridge inserted in the dock:
Cartridge status Displays the operating status for the RDX
cartridge. The status displays either “good” or an
error state.
Cartridge serial number The product serial number for the RDX
cartridge.
Cartridge label By default, the text is derived from the RDX
cartridge serial number.
Cartridge capacity The RDX cartridge’s total capacity (used and
unused).
Cartridge temp (Celsius) The current temperature of the inserted RDX
cartridge.
Write-protected Displays information on whether the RDX
cartridge is write-protected or not.
Table 6-1 RDX QuikStation physical device properties (continued)
Property Name Description