TANDBERG RDX QuikStation, Product Manual

Page: 88 / 130

78
P
RODUCT
M
ANUAL
1019786
C
HAPTER
5—L
OGICAL
D
EVICE
M
ANAGEMENT
2. Click the Connection tab.
If there is a host connected to the target, the host’s initiator node name will
be displayed in the Connection dialog window, as shown in the following
example.
Note:  You can also set iSCSI security from the iSCSI Management dialog window.
See “Setting iSCSI Security in the Remote Management Console” on
page 34 for more information.
M
OVING A
M
EDIA
C
ARTRIDGE
With RDX QuikStation virtual library and tape autoloader configurations, you
can logically move media to an open slot, to the IE port, or to the tape drives.
Note: If you move media to the IE port, the cartridge will be ejected from the
dock, and the media will be logically removed from the library.
In most cases, you should use your backup software application to logically
move media within the virtual library or autoloader. This functionality is built
into the RDX QuikStation mainly for testing and diagnostic purposes.
To logically move media:
1. From the Logical Device interface, select the tape slot, tape drive, or IE Port
from the tree view in the left pane.
2. Select
[Move{Media]
.
!
Important
Make sure that you do not have any backup jobs in progress before
you logically move a cartridge.