TANDBERG RDX QuikStation, Product Manual

Page: 28 / 130

18
P
RODUCT
M
ANUAL
1019786
C
HAPTER
2—I
NSTALLATION AND
S
ETUP
C
ONFIGURING
N
ETWORK
I
NFORMATION
Note: If you are able to obtain a valid IP address from your RDX QuikStation
LCD panels upon startup, skip this section and go to Connecting to the
Remote Management Console on page 20 .
To manually configure your RDX QuikStation network information:
1. Locate the USB flash drive that is included in your RDX QuikStation
accessory box and insert the flash drive into an open USB slot on any
computer with a text editor.
2. From the computer, navigate to the USB Flash Drive. Open the
network.conf file in a text editor. (For Windows users, open the file in
Notepad.)
Note: If you cannot find the USB flash drive that shipped with the RDX
QuikStation, you can download the network.conf file from the
Support>Drivers and Downloads section of the Tandberg Data web
site (www.tandbergdata.com).
Figure 2-6 The RDX QuikStation network.conf file
Edit this section