TANDBERG RDX QuikStation, Product Manual

Page: 87 / 130

O
CTOBER
2011
RDX Q
UIK
S
TATION
77
V
IEWING
A
CTIVE I
SCSI C
ONNECTIONS FOR
T
APE
L
IBRARIES
/A
UTOLOADERS
1. From the Logical Device interface, select the library/autoloader or drive
target from the tree view in the left pane.
Note: The Connection tab only displays when you have selected an iSCSI
device target from the left pane.
Target ID/LUN The iSCSI target/logical unit number that identifies the library/autoloader
and drives.
Status Displays the operating status for the device. The status displays either
“good”, “offline”, or an error state.
For I/E port and tape slots
Element Address The element address associated with the virtual location of the tape
library/autoloader slots. The element address correlates to the RDX dock
number.
Media label
(visible if the dock has an
RDX cartridge inserted)
The default media label is derived from the last six digits of the RDX cartridge
serial number and “L3”, which refers to an LTO-3 tape cartridge.
Media state The media state displays either “loaded” or “unloaded” depending on how
the drive is set in your backup application.
Media usage
(visible if the dock has an
RDX cartridge inserted)
Note: Media usage for RDX drives is unavailable. This property is only
reported for tape library, tape autoloader, and disk autoloader
configurations.
Displays the percentage of capacity that has been used for the RDX cartridge
(or virtual tape cartridge).
Table 5-4 Logical properties for virtual tape libraries and autoloaders
Property Name Description