TANDBERG RDX QuikStation, Product Manual

Page: 32 / 130

22
P
RODUCT
M
ANUAL
1019786
C
HAPTER
2—I
NSTALLATION AND
S
ETUP
S
YSTEM
S
ETTINGS
Refer to the table below to configure the following RDX QuikStation system
settings. For more information, see Chapter 4 on page 47 .
Table 2-3 Recommended system settings
Setting Purpose Where to find
Date/Time Set the date and time to your time
zone to receive accurate system
and troubleshooting information.
See “Setting Date and Time” on
page 49 for more information.
From the main menu
bar in the Remote
Management Console,
go to System Settings>
Date/Time.
Network
Information
Tandberg Data recommends that
you assign a static IP address to
prevent inadvertent IP address
changes of the iSCSI target.
You can also configure optional
DNS server addressing
information. See “Configuring
Network Information” on page 50
for more information.
From the main menu
bar in the Remote
Management Console,
go to System Settings>
Network.
The RDX QuikStation
will automatically
reboot after you have
made your network
changes.
Email Notification A valid email address is needed for
logging, error reporting, and
password recovery. See “Setting
Email Notifications” on page 53 for
more information.
From the main menu
bar in the Remote
Management Console,
go to System Settings>
Notification.
User Management As a best practice, change the
built-in administrator account
password. See “Editing a
password” on page 63 for more
information.
From the main menu
bar in the Remote
Management Console,
go to System
Settings>User.