TANDBERG 2000 MXP User Manual Download Page 307

Page: 307 / 314

Glossary

293

G.711:

Audio algorithm for normal quality audio (telephone quality, 3.1 kHz) The system will

always have G.711 enabled.

G.722:

Audio algorithm for high quality audio (7 kHz).

G.722.1:

Audio algorithm for compressed high quality audio (7 kHz)

G.728:

Audio algorithm for compressed normal quality audio (telephone quality, 3.1 kHz)

Gateway:

The gateway enables sites on IP and sites on ISDN to participate in meetings with

each other.

Global Phone Book:

A phone book provided by TMS.

H.261:

Video algorithm for legacy video compression and decompression. The system will always

transmit H.261

H.263:

Video algorithm for normal video compression and decompression

H.264:

Video algorithm for bandwidth-efficient video compression and decompression

Hardware serial number:

A unique number (listed in the System Information menu) to identify

your system towards your TANDBERG representatives.

Humfilter:

A highpass filter which reduces very low frequency noise.

iCIF:

Interlaced CIF, 352x288 pixels, 50 fields per second

Incoming call:

Someone calls in to your system

Incoming MCU Calls:

If occupied in a call, the system will provide a visual/audio indication of an

incoming call and ask to accept or reject the call.

IP address:

Defines the network address of the system. This address is only used in static mode.

IP assignment:

IP-address, IP-subnet mask and Gateway are assigned by the DHCP server.

IP assignment Static:

The system's IP-address and IP-subnet mask must be specified in the IP-

address field.

IP Precedence:

Used to define which priority the system should have in the network. Higher

numbers indicate higher priority.

IP subnet mask:

Defines the type of network. This address is only used in static mode.

IP TOS:

IP Type Of Service. Helps a router select a router path when multiple paths are
available.

iSIF:

Interlaced SIF, 352x240 pixels, 60 fields per second

Layout:

Use the Layout key to change picture layout on the screen.

Summary of Contents for 2000 MXP



























































































































































































































































































































Search results

Summary of Contents for 2000 MXP

Reviews:

Related manuals for 2000 MXP

Brands by name

Popular brands

TANDBERG 2000 MXP, User Manual

Search results

Summary of Contents for 2000 MXP

Reviews:

Related manuals for 2000 MXP

Brands by name

Popular brands