Digital Video Recorder User Manual
58
Step 2:
E
nter into the DVR’s Main Menu
Information
Network information to obtain
IP address, then input it in the browser, such as: http://210.21.229.138, user can enter
the control download interface.
Step 3:
The following setup steps are the same as steps 6-8 of Chapter 6.1.1 on LAN.
2. Connect the DVR to internet through router
Step 1:
E
nter into the DVR’s Main Menu
Setup
Network configuration
Network to
input IP address, subnet mask and gateway, or tick off "Obtain an IP address
automatically."
Step 2:
Make sure the LAN can be connected; access your router by entering the
gateway address, then log on the router management interface to map port.
In this paper, we take Linksys router for example. Specify the IP address and port to
be forwarded from the internal/local IP address of your DVR to the Internet in router
"Port Range Forwarding" of "Applications & Gaming". Each DVR has two ports. (LAN
IP address of DVR can be added to the DMZ host, different
router’s configuration is
different, and user can refer to the router manual.)
After mapping the port, user can
check the WAN IP address in the “running” of router,
directly access to the DVR through the WAN IP address and HTTP port, such as:
http://113.108.119.20:HTTP port number. Then enter into the control download
interface.
