TALOS DR04 User Manual Download Page 69

Page: 69 / 119

Digital Video Recorder User Manual

5.3.5 Online Users Information

Enter into Main Menu



Information



Online Users. In this interface, check all user

information. Click

“Refresh” button to refresh the current online user list. User can

remote view and operate device through IE browser, ISS, CMS.

5.4 Manual Alarm

Enter into Main Menu



Manual Alarm. Click "Alarm" button to trigger alarm, click

"Clear" button to stop alarm. If user ticks off

“Trigger”, it will alarm in accordance with

the setting of alarm out (refer to 4.6.5 Alarm Out); click Exit button to exit the current

interface.

5.5 Disk Management

5.5.1 Format Disk

Please format the hard disk before recording.

Step 1:

Enter into Main Menu



Disk Management



Disk.

Step 2:

Select a hard disk which needs to format,

click “Format” button.

Note: All recorded files (including locked files)

in the hard disk will be lost after

formatted.

In the disk management interface, user can modify the property of selected disk; click

“Refresh” button to refresh the disk information. Click "Browse" button to enter the

system information interface, user

can see the hard disk’s system information and the

number of saved pictures, click "Clear" button to clear all pictures stored on the hard

disk; click

“Apply” button to save the setting.

Note: When clearing all pictures on the hard disk, read-only pictures and locked

pictures cannot be deleted.

Summary of Contents for DR04
























































































































Search results

Summary of Contents for DR04

Reviews:

Related manuals for DR04

Brands by name

Popular brands

TALOS DR04, User Manual

Search results

Summary of Contents for DR04

Reviews:

Related manuals for DR04

Brands by name

Popular brands