TALOS DR04 User Manual Download Page 10

Page: 10 / 119

Digital Video Recorder User Manual

Chapter 2 Installation Guide

2.1 Open-package Check

When you receive the DVR, please check the unit and the accessories:

First, please check whether there is any visible damage to the package appearance.

The protective materials used for the package of the DVR can protect most accidental

clashes during transportation.

Then, please open the box and get rid of the plastic protective materials. Check

whether there is any visible damage to the DVR appearance.

Front panel and rear panel



The key function specification in the front panel and the interface specification in the

rear panel are in the user manual.



Please check the product type in the front panel whether is accordant with the

product type you order.

Notice:

1. The label in the rear panel is very important for the after-sale services. Please

protect it carefully. When you contact us for after-sale service, please provide the

product type and serial number on the label.

2. Please disconnect the power before being connected to other devices. Don't hot

plug in/out.

2.2 Install Hard Drive

Notice:

FOR REPAIR PURPOSES ONLY

1. This series support a SATA hard drive. Please use the hard drive

recommended by the manufacturers for security and safe field. Please refer to

Summary of Contents for DR04
























































































































Search results

Summary of Contents for DR04

Reviews:

Related manuals for DR04

Brands by name

Popular brands

TALOS DR04, User Manual

Search results

Summary of Contents for DR04

Reviews:

Related manuals for DR04

Brands by name

Popular brands