TALOS DR04 User Manual Download Page 17

Page: 17 / 119

Digital Video Recorder User Manual

In PTZ control:

Click left button to choose the buttons to control the PTZ. Click right

button to return to live mode.

Note:

Mouse is the default tool in all the operation below unless otherwise

noted.

Chapter 3 Basic Functions

3.1 Power On/Off

3.1.1 Power On

Before you power on the unit, please verify all the connections.

Step 1:

Connect with the source power; switch on the power button near the power

port in the rear panel.

Step 2:

The device will be loaded, and the power indicator will display red.

Step 3:

A WIZARD window will pop-up and display information about device name,

language, date and time, network, record, etc.

User can setup here and refer to the setup steps from the corresponding chapters. If

users don’t want to setup Wizard, please click Exit button and enter into the login

interface.

Notice: This

series can only support the menu on VGA monitor, BNC monitor

or HDMI monitor at one time. After the device is power on,

if there is live display

without the menu, please check the other outputs for the menu display, or press

Exit /ESC button (press and hold) to switch the output among BNC, HDMI and VGA.

3.1.2 Power Off

User can power off the device by using the remote control, keyboard or mouse



Using the remote control:

Summary of Contents for DR04
























































































































Search results

Summary of Contents for DR04

Reviews:

Related manuals for DR04

Brands by name

Popular brands

TALOS DR04, User Manual

Search results

Summary of Contents for DR04

Reviews:

Related manuals for DR04

Brands by name

Popular brands